Netgear WNR2000
How to Factory Reset the Netgear WNR2000 Wi-Fi Wireless Router
- Make sure your Netgear WNR2000 is powered on.
- Locate the factory reset button on the back of the WNR2000 router.
- Using a paper clip or similar pointed object, press and hold the reset button for at least 7 seconds.
- Release the button and wait 2-3 minutes for the router to fully reboot.
- You can now reconfigure your WNR2000 using the default credentials below.
NOTE: If the factory (also known as hard) reset button on your Netgear WNR2000 is too small to push with your finger, try using an object such as the tip of a paper clip.
This is often the best way to press the reset button on Netgear routers.
Netgear WNR2000 Default Login Credentials
After performing a factory reset, your Netgear WNR2000 will be restored to its default settings. Use the following credentials to access the router’s admin panel:
- Default IP Address: 192.168.1.1
- Default Username: admin
- Default Password: password
Open a web browser and navigate to 192.168.1.1 or http://www.routerlogin.net to access the Netgear WNR2000 setup page.
About the Netgear WNR2000
The Netgear WNR2000 (N300) is a single-band Wireless-N router with speeds up to 300 Mbps on the 2.4 GHz band. It features four 10/100 Ethernet LAN ports, one 10/100 WAN port, an integrated SPI firewall, and WPA/WPA2 wireless security. The WNR2000 includes push-button WPS for easy wireless setup, parental controls, and a compact desktop design suitable for small homes and apartments.
Specifications
| Manufacturer | Netgear |
|---|---|
| Model | WNR2000 |
| Wi-Fi Capable | Yes |
| Reset Capabilities | Factory Reset, Hard Reset, Soft Reset |
