Netgear WGR614L
How to Factory Reset the Netgear WGR614L Wi-Fi Wireless Router
- Make sure your Netgear WGR614L is powered on.
- Locate the factory reset button on the back of the WGR614L router.
- Using a paper clip or similar pointed object, press and hold the reset button for at least 7 seconds.
- Release the button and wait 2-3 minutes for the router to fully reboot.
- You can now reconfigure your WGR614L using the default credentials below.
NOTE: If the factory (also known as hard) reset button on your Netgear WGR614L is too small to push with your finger, try using an object such as the tip of a paper clip.
This is often the best way to press the reset button on Netgear routers.
Netgear WGR614L Default Login Credentials
After performing a factory reset, your Netgear WGR614L will be restored to its default settings. Use the following credentials to access the router’s admin panel:
- Default IP Address: 192.168.1.1
- Default Username: admin
- Default Password: password
Open a web browser and navigate to 192.168.1.1 or http://www.routerlogin.net to access the Netgear WGR614L setup page.
About the Netgear WGR614L
The Netgear WGR614L is a 54 Mbps Wireless-G (802.11g) router designed as an open-source-friendly model with official support for community firmware. It features four 10/100 Ethernet LAN ports, one 10/100 WAN port, an integrated SPI firewall, and WEP/WPA/WPA2 wireless security. The WGR614L was popular among enthusiasts for its compatibility with DD-WRT and other third-party firmware.
Specifications
| Manufacturer | Netgear |
|---|---|
| Model | WGR614L |
| Wi-Fi Capable | Yes |
| Reset Capabilities | Factory Reset, Hard Reset, Soft Reset |
