GL.iNet Beryl AX (GL-MT3000)

How to Factory Reset the GL.iNet Beryl AX (GL-MT3000) Wi-Fi Wireless Router

1. Ensure your router is powered on.
2. Locate the reset button on your GL-MT3000 Beryl AX router.
3. Press and hold the reset button for at least 10 seconds.
4. Release the button when the power LED begins to flash.
5. Wait 2-3 minutes until your router has fully reset and restarted.
6. You can now reconfigure your router by connecting to its default Wi-Fi network and accessing the admin panel.

NOTE: If the factory (also known as hard) reset button on your GL.iNet Beryl AX is recessed, try using an object such as the tip of a paper clip to press it.

This is often the best way to press the reset button on GL.iNet routers.

GL.iNet Beryl AX (GL-MT3000) Default Login Credentials

After performing a factory reset, your GL.iNet Beryl AX will be restored to its default settings. Use the following information to access the router’s admin panel:

• Default IP Address: 192.168.8.1
• Default Username: root (for LuCI) / none for admin panel
• Default Password: Set by user during first-time setup

Open a web browser and navigate to 192.168.8.1 to access the GL.iNet Beryl AX admin panel. After a factory reset, you will be prompted to create a new admin password during the initial setup wizard.

About the GL.iNet Beryl AX (GL-MT3000)

The GL.iNet Beryl AX (GL-MT3000) is a pocket-sized Wi-Fi 6 travel router powered by a MediaTek MT7981B 1.3 GHz dual-core processor with 512 MB of RAM. It delivers combined wireless speeds up to 2402 Mbps (5 GHz) + 574 Mbps (2.4 GHz) and features one 2.5G WAN port and one Gigabit LAN port. The Beryl AX runs on OpenWrt and includes built-in support for OpenVPN and WireGuard VPN with speeds up to 580 Mbps, making it an excellent choice for secure browsing while traveling.